Essential Audio Techniques: Capturing Clear Sound

10 Recording Tips for Recording Audio with High Quality

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Step by Step: Creating Your Channel’s Simple Subscribe Button

How to Make a YouTube Subscribe Link - Easy

Richard Bennett

Oct 26, 2023• Proven solutions

0

If you want to increase the total number of subscribers that you have on your YouTube page it is important that your page is easy to subscribe to.

A subscribe link is a link to your channel page which takes the person who clicks it to the same view of the page they would have if they had already clicked to subscribe. It triggers a pop-up asking them to confirm their subscription. If they were already interested enough to click the link and check out your channel they may confirm the subscription in the window, whereas they may forget to subscribe if they aren’t prompted.

A YouTube subscribe link is one of the best ways to share a link on your website, in social media posts, or anywhere you mention your channel.

How to Get a YouTube Subscribe Link

YouTube subscribe links aren’t some kind of exclusive perk – anyone can have one!

Step 1: Go to your YouTube channel page and click into the address bar so you can edit the URL.

Step 2: Add the following to the end of your channel URL:

?sub_confirmation=1

Step 3: Copy the entire URL including the part you added and paste it into a word document to save. Any time you share a link to your channel, make sure it is this link.

This will work both with channels that have custom URLs and channels which do not. Here’s an example:

https://www.youtube.com/channel/UCY\_LMaDAoa6hwHKBE4Dx56w

That’s a link for Wondershare Filmora Video Editor’s YouTube channel. With the modifier it looks like this:

https://www.youtube.com/channel/UCY\_LMaDAoa6hwHKBE4Dx56w?sub\_confirmation=1

Getting subscribers is tough, but you’ll get more if you ask and this is just another way of asking. The process for creating a YouTube subscribe link is easy and accessible to everyone.

Touch Up Your YouTube Videos with Filmora

Filmora features lots of video and audio editing tools that enables you to cut, trim and touch up the video clip easily. There are plentiful texts templates and elements, which can be used to create attractive call-outs.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

If you want to increase the total number of subscribers that you have on your YouTube page it is important that your page is easy to subscribe to.

A subscribe link is a link to your channel page which takes the person who clicks it to the same view of the page they would have if they had already clicked to subscribe. It triggers a pop-up asking them to confirm their subscription. If they were already interested enough to click the link and check out your channel they may confirm the subscription in the window, whereas they may forget to subscribe if they aren’t prompted.

A YouTube subscribe link is one of the best ways to share a link on your website, in social media posts, or anywhere you mention your channel.

How to Get a YouTube Subscribe Link

YouTube subscribe links aren’t some kind of exclusive perk – anyone can have one!

Step 1: Go to your YouTube channel page and click into the address bar so you can edit the URL.

Step 2: Add the following to the end of your channel URL:

?sub_confirmation=1

Step 3: Copy the entire URL including the part you added and paste it into a word document to save. Any time you share a link to your channel, make sure it is this link.

This will work both with channels that have custom URLs and channels which do not. Here’s an example:

https://www.youtube.com/channel/UCY\_LMaDAoa6hwHKBE4Dx56w

That’s a link for Wondershare Filmora Video Editor’s YouTube channel. With the modifier it looks like this:

https://www.youtube.com/channel/UCY\_LMaDAoa6hwHKBE4Dx56w?sub\_confirmation=1

Getting subscribers is tough, but you’ll get more if you ask and this is just another way of asking. The process for creating a YouTube subscribe link is easy and accessible to everyone.

Touch Up Your YouTube Videos with Filmora

Filmora features lots of video and audio editing tools that enables you to cut, trim and touch up the video clip easily. There are plentiful texts templates and elements, which can be used to create attractive call-outs.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

If you want to increase the total number of subscribers that you have on your YouTube page it is important that your page is easy to subscribe to.

A subscribe link is a link to your channel page which takes the person who clicks it to the same view of the page they would have if they had already clicked to subscribe. It triggers a pop-up asking them to confirm their subscription. If they were already interested enough to click the link and check out your channel they may confirm the subscription in the window, whereas they may forget to subscribe if they aren’t prompted.

A YouTube subscribe link is one of the best ways to share a link on your website, in social media posts, or anywhere you mention your channel.

How to Get a YouTube Subscribe Link

YouTube subscribe links aren’t some kind of exclusive perk – anyone can have one!

Step 1: Go to your YouTube channel page and click into the address bar so you can edit the URL.

Step 2: Add the following to the end of your channel URL:

?sub_confirmation=1

Step 3: Copy the entire URL including the part you added and paste it into a word document to save. Any time you share a link to your channel, make sure it is this link.

This will work both with channels that have custom URLs and channels which do not. Here’s an example:

https://www.youtube.com/channel/UCY\_LMaDAoa6hwHKBE4Dx56w

That’s a link for Wondershare Filmora Video Editor’s YouTube channel. With the modifier it looks like this:

https://www.youtube.com/channel/UCY\_LMaDAoa6hwHKBE4Dx56w?sub\_confirmation=1

Getting subscribers is tough, but you’ll get more if you ask and this is just another way of asking. The process for creating a YouTube subscribe link is easy and accessible to everyone.

Touch Up Your YouTube Videos with Filmora

Filmora features lots of video and audio editing tools that enables you to cut, trim and touch up the video clip easily. There are plentiful texts templates and elements, which can be used to create attractive call-outs.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

If you want to increase the total number of subscribers that you have on your YouTube page it is important that your page is easy to subscribe to.

A subscribe link is a link to your channel page which takes the person who clicks it to the same view of the page they would have if they had already clicked to subscribe. It triggers a pop-up asking them to confirm their subscription. If they were already interested enough to click the link and check out your channel they may confirm the subscription in the window, whereas they may forget to subscribe if they aren’t prompted.

A YouTube subscribe link is one of the best ways to share a link on your website, in social media posts, or anywhere you mention your channel.

How to Get a YouTube Subscribe Link

YouTube subscribe links aren’t some kind of exclusive perk – anyone can have one!

Step 1: Go to your YouTube channel page and click into the address bar so you can edit the URL.

Step 2: Add the following to the end of your channel URL:

?sub_confirmation=1

Step 3: Copy the entire URL including the part you added and paste it into a word document to save. Any time you share a link to your channel, make sure it is this link.

This will work both with channels that have custom URLs and channels which do not. Here’s an example:

https://www.youtube.com/channel/UCY\_LMaDAoa6hwHKBE4Dx56w

That’s a link for Wondershare Filmora Video Editor’s YouTube channel. With the modifier it looks like this:

https://www.youtube.com/channel/UCY\_LMaDAoa6hwHKBE4Dx56w?sub\_confirmation=1

Getting subscribers is tough, but you’ll get more if you ask and this is just another way of asking. The process for creating a YouTube subscribe link is easy and accessible to everyone.

Touch Up Your YouTube Videos with Filmora

Filmora features lots of video and audio editing tools that enables you to cut, trim and touch up the video clip easily. There are plentiful texts templates and elements, which can be used to create attractive call-outs.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Also read: