Achieving Auditory Perfection: Top Tips for Quality Audio

10 Recording Tips for Recording Audio with High Quality

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Mastering YouTube Video Extraction: A Step-by-Step Guide

How to Download Part of YouTube Video?

Richard Bennett

Mar 27, 2024• Proven solutions

YouTube is the second-most viewed social platform, with around 2.3 Billion people active on it every day.

It’s easy to find videos of your choice with a simple search online. You’ve probably come across ways to download a YouTube video, but what if you only want to download a part of the video and not the whole? Well, that’s exactly what we’ll be covering here.

Here in this article, you will learn about the most straightforward YouTube video cutter and its uses. The next time you see something interesting, you can straightaway download it!

• Part 1: How to Download a Certain Part of a YouTube Video？
• Part 2: How to Record YouTube Videos with Filmora? [Video Tutorial]

Part 1: How to Download a Certain Part of a YouTube Video？

Below are 6 software that are available to download part of youtube video, find which one fit you much. Watch a video description first!

Note: We resolutely oppose all forms of copyright-infringing downloads. This tutorial is only for downloading YouTube videos/audio materials from your own channel.

1 - Clideo	2 - YT Cutter	3 - VEED.IO
4 - Hashcut	5 - VideoCrops	6 - Kapwing

Try Filmora to Download and Edit YouTube Video for Free!

Filmora YouTube Video Editor is an expert in creating and editing videos for all YouTubers. You can use the built-in screen recorder to download YouTube videos and add cool visual effects and popular emojis to re-edit your video. Then you can upload to YouTube directly and gain more views!

Download & Edit YouTube Videos Download & Edit YouTube Videos Download & Edit YouTube Videos Learn More >

1. Clideo

Clideo is not only easy to use, but it’s safe too. It helps you cut parts of the video in just a few steps, and it’s completely free! Furthermore, it will delete the user information in 24 hours. Clideo also works even if you don’t log in or register.

You just need to follow the simple steps below to download the part of the YouTube video.

Step 1: Copy the YouTube link you want and paste it on the Clideo video cutter. As shown in the figure below, you need to paste it in the space on the homepage. You can also export the file to Google Drive and Dropbox. It is also compatible with Mobile and PC.

Step 2: Once you paste the link, you need to cut the video part using the slider. You then have to set the start and end times accordingly. You can also choose the “Fade in” or “Fade out” option to give your video smooth finishing. Clideo provides several extensions to download, but if you want to post your video on social media, it’s better to use the MP4 option. After finishing, press the “Cut” button.

Step 3: You can preview your video and save it on your device as the final step.

2. YT Cutter

It’s a super-easy video cutter that can download a part of any YouTube video in no time. YT Cutter also allows downloading and trimming the video online. The maximum limit is 1 minute for free account users, but it’s 20 minutes for premium users.

Here are the steps to download part of your YouTube video using YT Cutter.

Step 1: Click on the “start” button after pasting your YouTube URL.

Step 2: You can preview the part of the video you want to download online. After that, add the start and end times in the options bar on the left. Then, you’re good to go! Your video will be ready to download once you hit the “download” button.

3. VEED.IO

Veed.io YouTube video cutter is another flexible and easy tool to use. Paste the YouTube URL on Veed and cut or trim any part of the YouTube video easily.

Check out the simple steps to use Veed below:

Step 1: You will find the option to upload your file, record a video, or paste the YouTube video URL on Veed.

Step 2: Once you have uploaded your video in Veed, you can trim or cut a section by dragging or clicking the video ends.

Step 3: Soon after finishing your work, press the “download” button, and you finish it.

Filmora Video Editor

Create AI-Generated Video with Filmora

Filmora Discord video editor offers a ChatGPT plug-in and AI tools to enhance your creative vision. Make your idea into reality.

Create Video with ChatGPT Create Video with ChatGPT Create Video with ChatGPT Learn More >

4. Hashcut

Hashcut is user-friendly as it does not save up your video. If you like a video on YouTube and want to download a part of the video, Hashcut is your go-to!

Want to know how it works? Read below:

Step 1: You can search for the YouTube video you want to cut and paste the URL on the Hashcut box. Then, click the START RECORDING button to add the start timing, and then click the END RECORDING button to add the ending timing.

Step 2: You can also add stickers and texts as per your choice before saving the part of the YouTube video.

Step 3: Finally, you can compile multiple clips into a single clip and then hit “SAVE HASHCUT” to finish your work.

5. VideoCrops

VideoCrops is another wonderful tool to download a part of the YouTube video you want. It has limited tools as it is free. Be sure to download your video immediately after your work is done.

Here are the simple steps you need to follow to use VideoCrops.

Step 1: Open VideoCrops on your device, paste the YouTube video URL, and click the “Play” button.

Step 2: Select the video interval you want to crop and hit the “Crop selection” button below the video.

Step 3: Click the “Download” button below and enjoy your clip.

6. Kapwing

Kapwing is another cool tool that works on all devices such as Android, Mac, and iOS. It makes your work easy with a few simple trims and cuts.

Know how to get your work done with Kapwing here!

Step 1: If you want a part of any YouTube video, paste the link into the given space and wait for the video to be displayed on the screen.

Step 2: When the video appears, you need to select the slider and drag it to the part of the video you want for a final cut. You can also use the arrow key if you want better trimming. You can also zoom in or out for better results and adjust the video’s speed.

Step 3: When you’re finally done with the cropping and editing, press the “Export Video” button at the top right corner. You can now share and download the shortened video.

Part 2: How to Record YouTube Videos with Filmora?

Filmora is a software editor that is available for both Windows and MacOS. It can give you many editing and recording facilities. Besides, it offers many editing facilities like effects, color match, motion tracking, direct upload to social platforms, and a lot more. You need to follow a few steps to record YouTube videos using Filmora and easily save parts of the video.

You need to follow a few steps to record YouTube videos using Filmora and easily save parts of the video.

Record YouTube Video

Secure Download

Record YouTube Video

Secure Download

1. Open Wondershare Filmora and then click the PC Screen button to enter the screen recording interface.

1. In the Wondershare Screen Recorder tool, you can choose to record your full screen or any target window. For example, since we want to record part of the YouTube video, choose target window and then select the browser playing the YouTube video.

You need to choose the file location of where you want your video to be saved, set a record time limit and hit the red record button.

1. If you want to save only a part of the YouTube video, you can drag the play header to the section of your choice and trim it or use scissors to slice the part you want in Filmora. You can edit the part by adding headings and effects. And finally, export the video to use.

You can check this part to learn more details about how to use Filmora to record screen .

Final thoughts

That’s about it! These were some of the best tools to download sections of the YouTube videos of your choice. The steps are pretty much the same for all the tools mentioned above. You no longer have to reach out to your friends to do this for you. This article will help you out as we’ve mentioned the step-by-step process for each tool. First, you need to ensure you have a stable internet connection.

Download segments of the YouTube video effortlessly with a few taps on your phone now!

A cross-platform for making videos anywhere for all creators

Why your video editing isn’t good enough? How about some creative inspo?

• 100 Million+ Users
• 150+ Countries and Regions
• 4 Million+ Social Media Followers
• 5 Million+ Stock Media for Use

Try It Free Try It Free

Try It Free

Try It Free

* Secure Download

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

YouTube is the second-most viewed social platform, with around 2.3 Billion people active on it every day.

It’s easy to find videos of your choice with a simple search online. You’ve probably come across ways to download a YouTube video, but what if you only want to download a part of the video and not the whole? Well, that’s exactly what we’ll be covering here.

Here in this article, you will learn about the most straightforward YouTube video cutter and its uses. The next time you see something interesting, you can straightaway download it!

• Part 1: How to Download a Certain Part of a YouTube Video？
• Part 2: How to Record YouTube Videos with Filmora? [Video Tutorial]

Part 1: How to Download a Certain Part of a YouTube Video？

Below are 6 software that are available to download part of youtube video, find which one fit you much. Watch a video description first!

Note: We resolutely oppose all forms of copyright-infringing downloads. This tutorial is only for downloading YouTube videos/audio materials from your own channel.

1 - Clideo	2 - YT Cutter	3 - VEED.IO
4 - Hashcut	5 - VideoCrops	6 - Kapwing

Try Filmora to Download and Edit YouTube Video for Free!

Filmora YouTube Video Editor is an expert in creating and editing videos for all YouTubers. You can use the built-in screen recorder to download YouTube videos and add cool visual effects and popular emojis to re-edit your video. Then you can upload to YouTube directly and gain more views!

Download & Edit YouTube Videos Download & Edit YouTube Videos Download & Edit YouTube Videos Learn More >

1. Clideo

Clideo is not only easy to use, but it’s safe too. It helps you cut parts of the video in just a few steps, and it’s completely free! Furthermore, it will delete the user information in 24 hours. Clideo also works even if you don’t log in or register.

You just need to follow the simple steps below to download the part of the YouTube video.

Step 1: Copy the YouTube link you want and paste it on the Clideo video cutter. As shown in the figure below, you need to paste it in the space on the homepage. You can also export the file to Google Drive and Dropbox. It is also compatible with Mobile and PC.

Step 2: Once you paste the link, you need to cut the video part using the slider. You then have to set the start and end times accordingly. You can also choose the “Fade in” or “Fade out” option to give your video smooth finishing. Clideo provides several extensions to download, but if you want to post your video on social media, it’s better to use the MP4 option. After finishing, press the “Cut” button.

Step 3: You can preview your video and save it on your device as the final step.

2. YT Cutter

It’s a super-easy video cutter that can download a part of any YouTube video in no time. YT Cutter also allows downloading and trimming the video online. The maximum limit is 1 minute for free account users, but it’s 20 minutes for premium users.

Here are the steps to download part of your YouTube video using YT Cutter.

Step 1: Click on the “start” button after pasting your YouTube URL.

Step 2: You can preview the part of the video you want to download online. After that, add the start and end times in the options bar on the left. Then, you’re good to go! Your video will be ready to download once you hit the “download” button.

3. VEED.IO

Veed.io YouTube video cutter is another flexible and easy tool to use. Paste the YouTube URL on Veed and cut or trim any part of the YouTube video easily.

Check out the simple steps to use Veed below:

Step 1: You will find the option to upload your file, record a video, or paste the YouTube video URL on Veed.

Step 2: Once you have uploaded your video in Veed, you can trim or cut a section by dragging or clicking the video ends.

Step 3: Soon after finishing your work, press the “download” button, and you finish it.

Filmora Video Editor

Create AI-Generated Video with Filmora

Filmora Discord video editor offers a ChatGPT plug-in and AI tools to enhance your creative vision. Make your idea into reality.

Create Video with ChatGPT Create Video with ChatGPT Create Video with ChatGPT Learn More >

4. Hashcut

Hashcut is user-friendly as it does not save up your video. If you like a video on YouTube and want to download a part of the video, Hashcut is your go-to!

Want to know how it works? Read below:

Step 1: You can search for the YouTube video you want to cut and paste the URL on the Hashcut box. Then, click the START RECORDING button to add the start timing, and then click the END RECORDING button to add the ending timing.

Step 2: You can also add stickers and texts as per your choice before saving the part of the YouTube video.

Step 3: Finally, you can compile multiple clips into a single clip and then hit “SAVE HASHCUT” to finish your work.

5. VideoCrops

VideoCrops is another wonderful tool to download a part of the YouTube video you want. It has limited tools as it is free. Be sure to download your video immediately after your work is done.

Here are the simple steps you need to follow to use VideoCrops.

Step 1: Open VideoCrops on your device, paste the YouTube video URL, and click the “Play” button.

Step 2: Select the video interval you want to crop and hit the “Crop selection” button below the video.

Step 3: Click the “Download” button below and enjoy your clip.

6. Kapwing

Kapwing is another cool tool that works on all devices such as Android, Mac, and iOS. It makes your work easy with a few simple trims and cuts.

Know how to get your work done with Kapwing here!

Step 1: If you want a part of any YouTube video, paste the link into the given space and wait for the video to be displayed on the screen.

Step 2: When the video appears, you need to select the slider and drag it to the part of the video you want for a final cut. You can also use the arrow key if you want better trimming. You can also zoom in or out for better results and adjust the video’s speed.

Step 3: When you’re finally done with the cropping and editing, press the “Export Video” button at the top right corner. You can now share and download the shortened video.

Part 2: How to Record YouTube Videos with Filmora?

Filmora is a software editor that is available for both Windows and MacOS. It can give you many editing and recording facilities. Besides, it offers many editing facilities like effects, color match, motion tracking, direct upload to social platforms, and a lot more. You need to follow a few steps to record YouTube videos using Filmora and easily save parts of the video.

You need to follow a few steps to record YouTube videos using Filmora and easily save parts of the video.

Record YouTube Video

Secure Download

Record YouTube Video

Secure Download

1. Open Wondershare Filmora and then click the PC Screen button to enter the screen recording interface.

1. In the Wondershare Screen Recorder tool, you can choose to record your full screen or any target window. For example, since we want to record part of the YouTube video, choose target window and then select the browser playing the YouTube video.

You need to choose the file location of where you want your video to be saved, set a record time limit and hit the red record button.

1. If you want to save only a part of the YouTube video, you can drag the play header to the section of your choice and trim it or use scissors to slice the part you want in Filmora. You can edit the part by adding headings and effects. And finally, export the video to use.

You can check this part to learn more details about how to use Filmora to record screen .

Final thoughts

That’s about it! These were some of the best tools to download sections of the YouTube videos of your choice. The steps are pretty much the same for all the tools mentioned above. You no longer have to reach out to your friends to do this for you. This article will help you out as we’ve mentioned the step-by-step process for each tool. First, you need to ensure you have a stable internet connection.

Download segments of the YouTube video effortlessly with a few taps on your phone now!

A cross-platform for making videos anywhere for all creators

Why your video editing isn’t good enough? How about some creative inspo?

• 100 Million+ Users
• 150+ Countries and Regions
• 4 Million+ Social Media Followers
• 5 Million+ Stock Media for Use

Try It Free Try It Free

Try It Free

Try It Free

* Secure Download

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

YouTube is the second-most viewed social platform, with around 2.3 Billion people active on it every day.

It’s easy to find videos of your choice with a simple search online. You’ve probably come across ways to download a YouTube video, but what if you only want to download a part of the video and not the whole? Well, that’s exactly what we’ll be covering here.

Here in this article, you will learn about the most straightforward YouTube video cutter and its uses. The next time you see something interesting, you can straightaway download it!

• Part 1: How to Download a Certain Part of a YouTube Video？
• Part 2: How to Record YouTube Videos with Filmora? [Video Tutorial]

Part 1: How to Download a Certain Part of a YouTube Video？

Below are 6 software that are available to download part of youtube video, find which one fit you much. Watch a video description first!

Note: We resolutely oppose all forms of copyright-infringing downloads. This tutorial is only for downloading YouTube videos/audio materials from your own channel.

1 - Clideo	2 - YT Cutter	3 - VEED.IO
4 - Hashcut	5 - VideoCrops	6 - Kapwing

Try Filmora to Download and Edit YouTube Video for Free!

Filmora YouTube Video Editor is an expert in creating and editing videos for all YouTubers. You can use the built-in screen recorder to download YouTube videos and add cool visual effects and popular emojis to re-edit your video. Then you can upload to YouTube directly and gain more views!

Download & Edit YouTube Videos Download & Edit YouTube Videos Download & Edit YouTube Videos Learn More >

1. Clideo

Clideo is not only easy to use, but it’s safe too. It helps you cut parts of the video in just a few steps, and it’s completely free! Furthermore, it will delete the user information in 24 hours. Clideo also works even if you don’t log in or register.

You just need to follow the simple steps below to download the part of the YouTube video.

Step 1: Copy the YouTube link you want and paste it on the Clideo video cutter. As shown in the figure below, you need to paste it in the space on the homepage. You can also export the file to Google Drive and Dropbox. It is also compatible with Mobile and PC.

Step 2: Once you paste the link, you need to cut the video part using the slider. You then have to set the start and end times accordingly. You can also choose the “Fade in” or “Fade out” option to give your video smooth finishing. Clideo provides several extensions to download, but if you want to post your video on social media, it’s better to use the MP4 option. After finishing, press the “Cut” button.

Step 3: You can preview your video and save it on your device as the final step.

2. YT Cutter

It’s a super-easy video cutter that can download a part of any YouTube video in no time. YT Cutter also allows downloading and trimming the video online. The maximum limit is 1 minute for free account users, but it’s 20 minutes for premium users.

Here are the steps to download part of your YouTube video using YT Cutter.

Step 1: Click on the “start” button after pasting your YouTube URL.

Step 2: You can preview the part of the video you want to download online. After that, add the start and end times in the options bar on the left. Then, you’re good to go! Your video will be ready to download once you hit the “download” button.

3. VEED.IO

Veed.io YouTube video cutter is another flexible and easy tool to use. Paste the YouTube URL on Veed and cut or trim any part of the YouTube video easily.

Check out the simple steps to use Veed below:

Step 1: You will find the option to upload your file, record a video, or paste the YouTube video URL on Veed.

Step 2: Once you have uploaded your video in Veed, you can trim or cut a section by dragging or clicking the video ends.

Step 3: Soon after finishing your work, press the “download” button, and you finish it.

Filmora Video Editor

Create AI-Generated Video with Filmora

Filmora Discord video editor offers a ChatGPT plug-in and AI tools to enhance your creative vision. Make your idea into reality.

Create Video with ChatGPT Create Video with ChatGPT Create Video with ChatGPT Learn More >

4. Hashcut

Hashcut is user-friendly as it does not save up your video. If you like a video on YouTube and want to download a part of the video, Hashcut is your go-to!

Want to know how it works? Read below:

Step 1: You can search for the YouTube video you want to cut and paste the URL on the Hashcut box. Then, click the START RECORDING button to add the start timing, and then click the END RECORDING button to add the ending timing.

Step 2: You can also add stickers and texts as per your choice before saving the part of the YouTube video.

Step 3: Finally, you can compile multiple clips into a single clip and then hit “SAVE HASHCUT” to finish your work.

5. VideoCrops

VideoCrops is another wonderful tool to download a part of the YouTube video you want. It has limited tools as it is free. Be sure to download your video immediately after your work is done.

Here are the simple steps you need to follow to use VideoCrops.

Step 1: Open VideoCrops on your device, paste the YouTube video URL, and click the “Play” button.

Step 2: Select the video interval you want to crop and hit the “Crop selection” button below the video.

Step 3: Click the “Download” button below and enjoy your clip.

6. Kapwing

Kapwing is another cool tool that works on all devices such as Android, Mac, and iOS. It makes your work easy with a few simple trims and cuts.

Know how to get your work done with Kapwing here!

Step 1: If you want a part of any YouTube video, paste the link into the given space and wait for the video to be displayed on the screen.

Step 2: When the video appears, you need to select the slider and drag it to the part of the video you want for a final cut. You can also use the arrow key if you want better trimming. You can also zoom in or out for better results and adjust the video’s speed.

Step 3: When you’re finally done with the cropping and editing, press the “Export Video” button at the top right corner. You can now share and download the shortened video.

Part 2: How to Record YouTube Videos with Filmora?

Filmora is a software editor that is available for both Windows and MacOS. It can give you many editing and recording facilities. Besides, it offers many editing facilities like effects, color match, motion tracking, direct upload to social platforms, and a lot more. You need to follow a few steps to record YouTube videos using Filmora and easily save parts of the video.

You need to follow a few steps to record YouTube videos using Filmora and easily save parts of the video.

Record YouTube Video

Secure Download

Record YouTube Video

Secure Download

1. Open Wondershare Filmora and then click the PC Screen button to enter the screen recording interface.

1. In the Wondershare Screen Recorder tool, you can choose to record your full screen or any target window. For example, since we want to record part of the YouTube video, choose target window and then select the browser playing the YouTube video.

You need to choose the file location of where you want your video to be saved, set a record time limit and hit the red record button.

1. If you want to save only a part of the YouTube video, you can drag the play header to the section of your choice and trim it or use scissors to slice the part you want in Filmora. You can edit the part by adding headings and effects. And finally, export the video to use.

You can check this part to learn more details about how to use Filmora to record screen .

Final thoughts

That’s about it! These were some of the best tools to download sections of the YouTube videos of your choice. The steps are pretty much the same for all the tools mentioned above. You no longer have to reach out to your friends to do this for you. This article will help you out as we’ve mentioned the step-by-step process for each tool. First, you need to ensure you have a stable internet connection.

Download segments of the YouTube video effortlessly with a few taps on your phone now!

A cross-platform for making videos anywhere for all creators

Why your video editing isn’t good enough? How about some creative inspo?

• 100 Million+ Users
• 150+ Countries and Regions
• 4 Million+ Social Media Followers
• 5 Million+ Stock Media for Use

Try It Free Try It Free

Try It Free

Try It Free

* Secure Download

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

YouTube is the second-most viewed social platform, with around 2.3 Billion people active on it every day.

It’s easy to find videos of your choice with a simple search online. You’ve probably come across ways to download a YouTube video, but what if you only want to download a part of the video and not the whole? Well, that’s exactly what we’ll be covering here.

Here in this article, you will learn about the most straightforward YouTube video cutter and its uses. The next time you see something interesting, you can straightaway download it!

• Part 1: How to Download a Certain Part of a YouTube Video？
• Part 2: How to Record YouTube Videos with Filmora? [Video Tutorial]

Part 1: How to Download a Certain Part of a YouTube Video？

Below are 6 software that are available to download part of youtube video, find which one fit you much. Watch a video description first!

Note: We resolutely oppose all forms of copyright-infringing downloads. This tutorial is only for downloading YouTube videos/audio materials from your own channel.

1 - Clideo	2 - YT Cutter	3 - VEED.IO
4 - Hashcut	5 - VideoCrops	6 - Kapwing

Try Filmora to Download and Edit YouTube Video for Free!

Filmora YouTube Video Editor is an expert in creating and editing videos for all YouTubers. You can use the built-in screen recorder to download YouTube videos and add cool visual effects and popular emojis to re-edit your video. Then you can upload to YouTube directly and gain more views!

Download & Edit YouTube Videos Download & Edit YouTube Videos Download & Edit YouTube Videos Learn More >

1. Clideo

Clideo is not only easy to use, but it’s safe too. It helps you cut parts of the video in just a few steps, and it’s completely free! Furthermore, it will delete the user information in 24 hours. Clideo also works even if you don’t log in or register.

You just need to follow the simple steps below to download the part of the YouTube video.

Step 1: Copy the YouTube link you want and paste it on the Clideo video cutter. As shown in the figure below, you need to paste it in the space on the homepage. You can also export the file to Google Drive and Dropbox. It is also compatible with Mobile and PC.

Step 2: Once you paste the link, you need to cut the video part using the slider. You then have to set the start and end times accordingly. You can also choose the “Fade in” or “Fade out” option to give your video smooth finishing. Clideo provides several extensions to download, but if you want to post your video on social media, it’s better to use the MP4 option. After finishing, press the “Cut” button.

Step 3: You can preview your video and save it on your device as the final step.

2. YT Cutter

It’s a super-easy video cutter that can download a part of any YouTube video in no time. YT Cutter also allows downloading and trimming the video online. The maximum limit is 1 minute for free account users, but it’s 20 minutes for premium users.

Here are the steps to download part of your YouTube video using YT Cutter.

Step 1: Click on the “start” button after pasting your YouTube URL.

Step 2: You can preview the part of the video you want to download online. After that, add the start and end times in the options bar on the left. Then, you’re good to go! Your video will be ready to download once you hit the “download” button.

3. VEED.IO

Veed.io YouTube video cutter is another flexible and easy tool to use. Paste the YouTube URL on Veed and cut or trim any part of the YouTube video easily.

Check out the simple steps to use Veed below:

Step 1: You will find the option to upload your file, record a video, or paste the YouTube video URL on Veed.

Step 2: Once you have uploaded your video in Veed, you can trim or cut a section by dragging or clicking the video ends.

Step 3: Soon after finishing your work, press the “download” button, and you finish it.

Filmora Video Editor

Create AI-Generated Video with Filmora

Filmora Discord video editor offers a ChatGPT plug-in and AI tools to enhance your creative vision. Make your idea into reality.

Create Video with ChatGPT Create Video with ChatGPT Create Video with ChatGPT Learn More >

4. Hashcut

Hashcut is user-friendly as it does not save up your video. If you like a video on YouTube and want to download a part of the video, Hashcut is your go-to!

Want to know how it works? Read below:

Step 1: You can search for the YouTube video you want to cut and paste the URL on the Hashcut box. Then, click the START RECORDING button to add the start timing, and then click the END RECORDING button to add the ending timing.

Step 2: You can also add stickers and texts as per your choice before saving the part of the YouTube video.

Step 3: Finally, you can compile multiple clips into a single clip and then hit “SAVE HASHCUT” to finish your work.

5. VideoCrops

VideoCrops is another wonderful tool to download a part of the YouTube video you want. It has limited tools as it is free. Be sure to download your video immediately after your work is done.

Here are the simple steps you need to follow to use VideoCrops.

Step 1: Open VideoCrops on your device, paste the YouTube video URL, and click the “Play” button.

Step 2: Select the video interval you want to crop and hit the “Crop selection” button below the video.

Step 3: Click the “Download” button below and enjoy your clip.

6. Kapwing

Kapwing is another cool tool that works on all devices such as Android, Mac, and iOS. It makes your work easy with a few simple trims and cuts.

Know how to get your work done with Kapwing here!

Step 1: If you want a part of any YouTube video, paste the link into the given space and wait for the video to be displayed on the screen.

Step 2: When the video appears, you need to select the slider and drag it to the part of the video you want for a final cut. You can also use the arrow key if you want better trimming. You can also zoom in or out for better results and adjust the video’s speed.

Step 3: When you’re finally done with the cropping and editing, press the “Export Video” button at the top right corner. You can now share and download the shortened video.

Part 2: How to Record YouTube Videos with Filmora?

Filmora is a software editor that is available for both Windows and MacOS. It can give you many editing and recording facilities. Besides, it offers many editing facilities like effects, color match, motion tracking, direct upload to social platforms, and a lot more. You need to follow a few steps to record YouTube videos using Filmora and easily save parts of the video.

You need to follow a few steps to record YouTube videos using Filmora and easily save parts of the video.

Record YouTube Video

Secure Download

Record YouTube Video

Secure Download

1. Open Wondershare Filmora and then click the PC Screen button to enter the screen recording interface.

1. In the Wondershare Screen Recorder tool, you can choose to record your full screen or any target window. For example, since we want to record part of the YouTube video, choose target window and then select the browser playing the YouTube video.

You need to choose the file location of where you want your video to be saved, set a record time limit and hit the red record button.

1. If you want to save only a part of the YouTube video, you can drag the play header to the section of your choice and trim it or use scissors to slice the part you want in Filmora. You can edit the part by adding headings and effects. And finally, export the video to use.

You can check this part to learn more details about how to use Filmora to record screen .

Final thoughts

That’s about it! These were some of the best tools to download sections of the YouTube videos of your choice. The steps are pretty much the same for all the tools mentioned above. You no longer have to reach out to your friends to do this for you. This article will help you out as we’ve mentioned the step-by-step process for each tool. First, you need to ensure you have a stable internet connection.

Download segments of the YouTube video effortlessly with a few taps on your phone now!

A cross-platform for making videos anywhere for all creators

Why your video editing isn’t good enough? How about some creative inspo?

• 100 Million+ Users
• 150+ Countries and Regions
• 4 Million+ Social Media Followers
• 5 Million+ Stock Media for Use

Try It Free Try It Free

Try It Free

Try It Free

* Secure Download

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Also read: