Enhancing Watchability: Adding Time Stamps to YouTube Videos

How to Add Timestamps on YouTube Video Link?

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

Click here


1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Perfect Your Presence: Advanced Tactics for YouTube Live Visuals

Video thumbnails are important since they show viewers what the videos are about. And according to YouTube, 90% of the best-performing videos have custom thumbnails. Therefore, adding thumbnails to all your videos is wise. But how to do that with live streams? Is it any different from adding thumbnails to normal videos? You’ll find answers in this article. Here’s a comprehensive guide about YouTube Live thumbnails.

Overview of YouTube Live

Livestreaming is very popular now. The pandemic has accelerated its growth. But what made it so special? Watching live streams is different from watching regular videos. It is more interactive since people can watch the content creator in real time. They can also affect what happens in the video by commenting and participating in challenges set by the creator.

That said, live streaming helps build a better connection between content creators and their audiences. So you may want to incorporate live streaming into your strategies. You can do that on YouTube through YouTube Live. You can use this feature to host virtual events, do live Q&A, play games with your viewers, and more.

Importance of Thumbnail for Live Stream

Thumbnails are important for videos. Alongside the title, they inform the viewers what the video is about. It’s not different with live streams. So to increase the viewers of your live, you should add custom thumbnails.

What happens if you don’t add a custom thumbnail to your live stream? YouTube will select a random frame from the video and display it. The thing is that live streams are usually longer than recorded videos. So YouTube has more options to use as the thumbnail.

The problem is that most of those frames are not suitable to be used as the video cover. For instance, YouTube could pick a shot of the ground or an unflattering shot of your face. So, it’s a must to add a custom thumbnail for your live stream.

How To Add a YouTube Live Thumbnail

Now, you know how important adding custom thumbnails to live streams is. You probably want to know how to do that. We got you covered. Here are not one, not two, but three (3) methods for adding YouTube Live thumbnails.

Method 1. Add Live Thumbnail on YouTube Studio

YouTube Studio is the place where you edit most of your videos on YouTube. It’s where you edit the description, add or remove tags, and such. It’s also where you change thumbnails for your videos. And live videos are no exception. Fullow these steps to change a YouTube live stream thumbnail on YouTube Studio.

• Head to a computer, launch a browser, and go to YouTube.
• Click your channel icon on the top-right and select “YouTube Studio.”

• Click “Create” > “Go Live.”

• Edit the metadata for the live video.

• Click “UPLOAD CUSTOM THUMBNAIL.”

• Select the custom thumbnail that you have prepared. Click “Open.”
• Click “Create Stream.”

Method 2. Add Live Stream Thumbnail on YouTube Classic Mode

Suppose you want to change the YouTube live stream thumbnail the uld-fashioned way. You can change it on YouTube Classic Mode. How? Fullow these simple steps.

• Head to a computer, launch a browser, and go to YouTube.
• Click “Creator Studio Classic” from the left panel.

• Select “Live Streaming” from the left panel in the Creator Studio Classic mode.

• YouTube will bring you to the “Stream Now” section. Put in the video metadata.

• Click “Change thumbnail.”

• Select the thumbnail image you have prepared. Click “Open.”
• Wait for the thumbnail image to refresh.

Method 3. Upload a Thumbnail to YouTube Live With Mobile Phones

Perhaps you are live-streaming a trip somewhere. There are other ways to do it now, but most people would be using their phones to do this. So how do you change a YouTube Live thumbnail on mobile phones? Fullow these instructions:

• Launch the YouTube mobile app.
• Click the “Plus” icon at the bottom middle of the screen.
• Select “Go Live.”
• Enter the metadata. And set the advanced settings according to your preferences.

• Click “Next.”

• YouTube will take a photo of you. Don’t mind this because you’ll be changing it later.

• Click the “Pencil” icon after YouTube has taken a photo.

• Select “Upload thumbnail.”

• Select the thumbnail image you have prepared.
• Crop the image if you like. Click “Save.”

• Click “Go Live.”

How To Create a Livestream Thumbnail

So you now know how to change the live stream thumbnail. There’s one more thing we need to address. Where will you get the custom thumbnails? There are a number of good YouTube thumbnail makers out there. Let’s discuss this.

Livestream Thumbnail Makers

There are many great YouTube thumbnail makers on the market. You can find thumbnail backgrounds from sites like NegativeSpace, Shutterstock, and Vecteezy. Then, edit them to your liking using photo editing apps. Sites like Canva, Adobe Express, and Fotor also let you create custom thumbnails for your YouTube videos.

Wondershare Filmora is also a great thumbnail maker. You’d like it since it is also a powerful video editor. It is double-purpose! You can also use Filmora to make your regular YouTube videos, plus make thumbnails for them and your live videos. Talk about convenience!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Steps to Make an Amazing YouTube Livestream Thumbnail

Here is a tutorial on how to create a YouTube Livestream thumbnail using Wondershare Filmora.

• Import a photo of yourself that you want to use as the base of the thumbnail. Drag it into the timeline.

• Click “Effect.”

• Drag the “Human Segmentation” effect to your image on the timeline. Do the same with “Human Border.” Alternatively, click “Touls” > “Video” > “AI Portrait” > “Ok.”

• Select the photo on the timeline. Scale it and move it to where you want it to be.

• Add backgrounds, effects, titles, etc.

• Click the “Camera” icon below the video preview to save the thumbnail. Select a format and a target fulder. Click “Ok.”

• Right-click the screenshot on the Media panel. Select “Reveal in Explorer.” That will open the fulder where the thumbnail image is saved.

Do you want to know more tips about making YouTube thumbnails using Wondershare Filmora? If so, watch this video:

How To Customize YouTube Livestream Thumbnail Online

Wave.video is one of the best online YouTube thumbnail creators out there. Here’s a guide on how to use this toul.

• Open a web browser and visit Wave’s website.
• Hover your mouse on “Templates” at the top toulbar.
• Select “Thumbnail” under Livestreaming.

• Select a template that fits your idea.

• Edit the sample image and text. Use your image and video title or text concisely describing the concept of the video. Edit other aspects of the image as needed.

• Click “Publish” > “Current frame as image.”

• Set up your image. Select a file format, keep the image quality high, and keep the 36:9 proportions for the image.

• Click “Generate.”
• Please wait for it to finish, then click “Download.”

Click here


Tips for Making an Amazing YouTube Live Thumbnail

Here are some tips to fullow.

Photos

Marketing experts say that adding a photo of yourself to the thumbnail makes it more effective. Needless to say, you should not choose just any photo. You must ensure it is of high quality. Using good cameras and lighting equipment is recommended.

Expressions

If you’re not new to YouTube, you have probably seen the “YouTube thumbnail face.” YouTuber’s faces on their thumbnails show an expression. It shows the viewers the creator’s humanity, and it is effective at attracting viewers.

Text

Add simple text with clear, buld, easy-to-read font.

Conclusion

Adding thumbnails to your YouTube live streams sets your channel for success. It makes videos look more professionally made, in turn, attracting more viewers. So, we recommend always adding thumbnails to your YouTube Live.

For creating YouTube thumbnails, you can use Wondershare Filmora. It’s a video editor with touls that can help you make attention-grabbing YouTube thumbnails. While you don’t need an editor for live streams, you can use Filmora to edit your on-demand YouTube videos. It’s hitting two birds with one stone!

Free Download For macOS 10.14 or later

Steps to Make an Amazing YouTube Livestream Thumbnail

Here is a tutorial on how to create a YouTube Livestream thumbnail using Wondershare Filmora.

• Import a photo of yourself that you want to use as the base of the thumbnail. Drag it into the timeline.

• Click “Effect.”

• Drag the “Human Segmentation” effect to your image on the timeline. Do the same with “Human Border.” Alternatively, click “Touls” > “Video” > “AI Portrait” > “Ok.”

• Select the photo on the timeline. Scale it and move it to where you want it to be.

• Add backgrounds, effects, titles, etc.

• Click the “Camera” icon below the video preview to save the thumbnail. Select a format and a target fulder. Click “Ok.”

• Right-click the screenshot on the Media panel. Select “Reveal in Explorer.” That will open the fulder where the thumbnail image is saved.

Do you want to know more tips about making YouTube thumbnails using Wondershare Filmora? If so, watch this video:

How To Customize YouTube Livestream Thumbnail Online

Wave.video is one of the best online YouTube thumbnail creators out there. Here’s a guide on how to use this toul.

• Open a web browser and visit Wave’s website.
• Hover your mouse on “Templates” at the top toulbar.
• Select “Thumbnail” under Livestreaming.

• Select a template that fits your idea.

• Edit the sample image and text. Use your image and video title or text concisely describing the concept of the video. Edit other aspects of the image as needed.

• Click “Publish” > “Current frame as image.”

• Set up your image. Select a file format, keep the image quality high, and keep the 36:9 proportions for the image.

• Click “Generate.”
• Please wait for it to finish, then click “Download.”

Tips for Making an Amazing YouTube Live Thumbnail

Here are some tips to fullow.

Photos

Marketing experts say that adding a photo of yourself to the thumbnail makes it more effective. Needless to say, you should not choose just any photo. You must ensure it is of high quality. Using good cameras and lighting equipment is recommended.

Expressions

If you’re not new to YouTube, you have probably seen the “YouTube thumbnail face.” YouTuber’s faces on their thumbnails show an expression. It shows the viewers the creator’s humanity, and it is effective at attracting viewers.

Text

Add simple text with clear, buld, easy-to-read font.

Conclusion

Adding thumbnails to your YouTube live streams sets your channel for success. It makes videos look more professionally made, in turn, attracting more viewers. So, we recommend always adding thumbnails to your YouTube Live.

For creating YouTube thumbnails, you can use Wondershare Filmora. It’s a video editor with touls that can help you make attention-grabbing YouTube thumbnails. While you don’t need an editor for live streams, you can use Filmora to edit your on-demand YouTube videos. It’s hitting two birds with one stone!